Slug catchers (UPOG)

CONFORMITY CERTIFICATE 

Slug catcher equipment is designed for withdrawal of non-associated gas from oil-gas mixture and elimination of flow and pressure pulsations. Slug catcher to be installed before the separators (NGS, NGSV), discharge phase separator (KDFT) at the input of DNS, UPSV, UPN. 

Produced as per of two types:

Slug catcher is packaged with piping and shut-off valves, gauge pressure transmitter, thermal transducers, structural sections and maintenance platforms. 

The inner surface of UPOG is treated with the anti-corrosion coating that allows extending technical lifetime up to 20 years. 

UPOG dimensions and volume are to be specified depending on capacity, physical-chemical properties and gas-oil ratio.

UPOG is demountable and to be delivered in pipe sections and supporting structures that to be assembled on the site.

Produced as per TU 28.99.39-018-20676863-2017

Reference designation sample for ordering a product:
UPOG 700-1,6-V1-C-HL1, where:

• 700 - nominal case diameter, mm;
• 1,6 - design pressure, MPa;
• V1, 2 - type 1, type 2
• C -internal anti-corrosion coating;
• HL1 - climatic modification as per GOST 15150.