Flare knock-out drum (FS)

CONFORMITY CERTIFICATE

  Flare KO drums are designed to separate gas from dropping liquid and mechanical impurities, catching of liquid plugs generating in gas pipelines; Included into flare system of oil treatment units (UPN), CPPS, UPSV, UPG, GSU, KPG, DNS and other surface facilities of oil&gas producing enterprises, other surface facilities of oil&gas producing enterprises.

Flare KO drums are designed and manufactured as per TU 28.99.39-008-20676863-2017 in accordance with requirements of technical regulation of Customs union "On safety of equipment operating under excessive pressure" (TR TS 032/2013), GOST R 52630, OST 26.260.18, OST 26.260.758. 

Designation sample for ordering of a product: 

Flare KO Drum FS -1000-2-T-I TU 28.99.39-008-20676863-2017, where:
FS - flare KO drum;
      1000 – internal diameter, mm;
      2 – material design, (1 - up to minus 40 °С, 2 – up to minus 60°С);
      Т – heat treatment;

      I - bracket for mounting insulation

Vessel flare KO drums (FSE) are assembled with internal equipment designed to separate gas from dropping liquid and mechanical impurities, destruction of liquid plugs generating in gas pipelines; Can be delivered with piping, shut-off valves, instrumentation, maintenance platform with ladder and condensate pumps upon customer request.

Nominal size	Parameters
	Internal diameter of the case, mm	Device volume, m3	Capacity * thousand nm3/day,	Operating pressure*, MPa (g)	Design pressure, MPa	Design temperature of case wallоС
FS-1000	1000	4	950	0,05	0,6; 1,0; 1,6; 2,5	100
FS-1200	1200	6,3	1365
FS-1400	1400	11	1857
FS-1600	1600	12,5	2425
FS-1800	1800	25	3070
FS-2400	2400	50	5460
FS-2800	2800	80	7430
FS-3000	3000	100	8530
FS-3200	3200	140	9705
FS-3400	3400	200	10950

Note: * With operating pressure of 0,05 MPa. Capacity with different value of operating pressure to be recalculated.