Automated line heaters

Automated line heaters are designed for heating oil, oil emulsions, gas, formation water, intermediate coolant, process and heating water at complexes of field treatment and transportation and (or) primary oil treatment.

They are produced according to TU 28.99.39-021-20676863-2018 of the following types:

PP-0,63 A, PP-0,63 AZH, PP-0,63 AMZHG, PP-1,6 A,
PP-1,6 AZH, PP-1,6 AMZHG, PBT-1,6 A, PBT-1,6 AZH, PBT-1,6 AMZHG, PPT-0,2 A, PPT-0,2 AZH,
PPT-0,2 AMZHG.

AMZHG - type of heater designed for operation on natural or associated gas and liquid fuel (crude oil, heating oil and diesel fuel), A - when operating only on natural or associated gas, AZh - when operating only on liquid fuel.

Furnaces PP-0,63 are produced single-circuit and double-circuit (with one or two coils) for heating oil emulsion and fresh water.

Climatic execution:

У1 and ХЛ1 according to GOST 15150 with air temperature at operation:
for У1 - from minus 45 °C to plus 40 °C for ХЛ1 - from minus 60 °C to plus 40 °C

Equipment composition

The heaters consist of a tank, coils (one or two), furnace, burner unit, flue pipe.

The heaters are delivered on a base frame complete with a liquid fuel preparation unit (if necessary), with a fan unit, with an automation system.

Designation:

Example of product record when ordering:

PP - 0,63 AMZHG

according to TU 28.99.39-021-20676863-2018, where

PP - track heater;

0,63 - heat capacity, Gcal/hour;

AMZhG is a heater designed to operate on natural or associated gas and liquid fuel (crude oil, heating oil and diesel fuel.

Technical characteristics

Average operating time per failure, not less than 17 000 h Average life before overhaul, not less than 70 000 h Estimated service life 25 years Repairable product